Lucerne V6-3.8L VIN 2 (2006)
6. Remove the starter cable from the BEC stud.
7. Remove the starter cable bolt (7) from the side rail.
8. Reposition the starter cable terminal (5) from the side rail.
9. Remove the starter cable retainer (1) from the tie bar.
10. Remove the starter cable retainer (2) from the BEC housing.
11. Remove the starter cable retainer (6) from the side rail.
12. Reposition the starter cable boot.
13. Remove the generator terminal nut.
14. Remove the starter cable from the generator.
15. Remove the front compartment sight shield.
16. Remove the "BAT" terminal nut (3) from the starter.
17. Remove the starter solenoid cable terminal (4) from the starter.
18. Remove the starter cable ground bolt (5) and reposition the starter cable ground.
19. Remove the starter cable retainers (1, 6) from the frame.
20. Remove the starter cable.
