Lucerne V6-3.8L VIN 2 (2006)
Rear Subframe Mount: Service and Repair
Forward Body Mount Replacement
Forward Body Mount Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Remove the exhaust system.
3. Support the forward end of the rear suspension support assembly with a jack stand.
4. Remove the brackets from the body at the support assembly forward mounts.
5. Remove the two bolts securing the front of the support assembly to the body of the vehicle.
6. Lower the front end of the support assembly enough for the forward mount (1) removal.
7. Bend the tabs (1) on the inboard mount (2) and tap the mount downward and out of the support assembly.
Installation Procedure