Lucerne V6-3.8L VIN 2 (2006)
1. Tap the mount into the support assembly, ensuring that the flat is outboard (2) and the notch (1) is rearward upon installation.
2. Bend the tabs outboard with a large pair of channel lock pliers.
3. Raise the support assembly to the body of the vehicle.
4. Notice: Refer to Fastener Notice in Service Precautions.
Install the two bolts securing the front of the support assembly to the vehicle body.
^
Tighten the bolts to 191 Nm (141 ft. lbs.).
5. Install the brackets to the body at the support assembly forward mounts.
^
Tighten the bolts to 86 Nm (63 ft. lbs.).
6. Install the exhaust system.
7. Lower the vehicle.
