Lucerne V6-3.8L VIN 2 (2006)
2. Connect the air hose to the air compressor at two places.
3. Install the air dryer on the air compressor.
4. Install the air compressor assembly onto the bracket with three bolts.
^
Tighten three bolts to 3 Nm (26 inch lbs.).
5. Install the heat shield on the air compressor bracket with two bolts (Do not install the third heat shield bolt. It must be installed after the air tube is
connected).
6. Install the air compressor connector to the connector anchor.
7. Install the air compressor assembly on the vehicle with two nuts and a bolt.
^
Tighten the bolt to 9 Nm (80 inch lbs.).
^
Tighten two nuts to 9 Nm (80 inch lbs.).
8. Connect the harness connector to the air compressor connector.
9. Install the intake air filter on the vehicle.
