buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

05-06-01-028|Page 13649 > < Reverse Servo Replacement|Page 13643
Page 1
background image

Bell Housing: Customer Interest
Engine - Engine Compartment Ticking Scraping Noise

Bulletin No.: 05-06-01-028

Date: September 16, 2005

TECHNICAL

Subject:
Rattling, Ticking or Scraping Noise from Engine Compartment (Inspect Transmission Rear Dust Cover)

Models:
2005 Buick Park Avenue
2005-2006 Buick Allure (Canada Only), LaCrosse, LeSabre
2006 Buick Lucerne
2005 Chevrolet Impala, Monte Carlo
2005 Pontiac Bonneville
2005-2006 Pontiac Grand Prix, Grand Prix GTP

with 3800 Series II or Series III 3.8L V6 Engine (VINs K, 1, 2, 4 - RPOs L36, L67, L26, L32)

Condition

Some customers may comment on a rattling, ticking or scraping noise coming from the engine compartment.

Cause

This condition may be caused by the transmission rear (flywheel/flexplate) dust cover being installed incorrectly, resulting in the cover contacting the
flexplate.

Correction

Inspection of Rear Transmission (Flexplate) Dust Cover

Important:

The rear dust cover has a designed-in bow. Refer to the shaded area (3) of the illustration above. Do not confuse this designed-in bow as a
warp in the cover.

05-06-01-028|Page 13649 > < Reverse Servo Replacement|Page 13643