Lucerne V6-3.8L VIN 2 (2006)
Case: Service and Repair
Case Side Cover Replacement
Removal Procedure
1. Remove the engine sight shield.
2. Remove the air cleaner intake duct.
3. Remove the range selector cable from the range selector lever.
4. Remove the range elector cable bracket nuts.
5. Remove the range selector cable bracket from the transmission case and set aside.
6. Disconnect the transaxle electrical connector C100 (2).
7. Disconnect the wiring harness (3) from the wiring harness retainer (1) on the transaxle.
