Lucerne V6-3.8L VIN 2 (2006)
14. Install the two left transaxle mount nuts (1).
^
Tighten the nut to 50 Nm (37 ft. lbs.).
15. Position the brake pressure modulator valve into the bracket and install the mounting bolt (2).
^
Tighten the bolt to 10 Nm (89 inch lbs.).
16. Install the brake line retainers (1) onto the frame.
17. Install the power steering gear mounting bolts.
^
Tighten the bolts to 70 Nm (95 ft. lbs.).
18. Install the power steering line retainers onto the frame.
19. Install the ball joint into the steering knuckle.
20. Install the stabilizer bar links.
21. Install the front air deflector.