Lucerne V6-3.8L VIN 2 (2006)
Shift Cable: Service and Repair
4T65-E - Automatic Transaxle
Automatic Transmission Range Selector Cable Replacement
Removal Procedure
1. Set the park brake and chock the wheels.
2. Fully lift the retainer from the transaxle range selector cable mechanism.
3. Disconnect the transaxle range selector cable terminal from the transaxle manual shift lever pin.
4. Press the locking tabs inward in order to release the transaxle range selector cable from the bracket.
5. Remove the left closeout/insulator panel.
6. Remove the retaining clip from the range selector cable.
7. Remove the range selector cable from the column control lever.