Lucerne V6-3.8L VIN 2 (2006)
5. Disconnect the torque converter clutch pulse width modulation (TCC PWM) solenoid electrical connector.
6. Remove the TCC PWM solenoid retaining clip (314F).
7. Remove the TCC PWM solenoid (334).
8. Remove the O-ring seals (305, 306) from the TCC PWM solenoid valve (334) ONLY if they are damaged.
Installation Procedure
1. Install new O-ring seals (305, 306) onto the TCC PWM solenoid valve (334) if they were removed.
2. Install the TCC PWM solenoid (334).
3. Hold the TCC PWM solenoid in place while installing the retaining clip (314F).
4. Connect the TCC PWM solenoid electrical connector.
5. Install the oil pump (200) to the valve body (300).
