Lucerne V6-3.8L VIN 2 (2006)
Transmission Pressure Test Port: Service and Repair
4T80-E - Automatic Transaxle
Oil Pressure Test Plug Replacement
Removal Procedure
1. Remove the throttle body air inlet duct.
2. Remove the oil pressure test plug (1).
Installation Procedure
1. Notice: Refer to Fastener Notice in Service Precautions.
Install the oil pressure test plug (1).
^
Tighten the oil pressure test plug to 22 Nm (16 ft. lbs.).
2. Install the throttle body air inlet duct.