Lucerne V6-3.8L VIN 2 (2006)
^
The 379 to 16 Nm (11 ft. lbs.)
^
The 380 to 25 Nm (18 ft. lbs.)
^
The 381 to 8 Nm (70 inch lbs.)
^ The 384 to 12 Nm (106 inch lbs.)
13. Install the oil pump.
14. Install the wiring harness.
15. Install the case side cover.
16. Fill the transaxle to the proper level. Refer to Fluid Capacity Specifications.
17. Inspect the transaxle fluid level.
18. Inspect for fluid leaks.
19. Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to relearn TAP
values. Transmission performance may be affected as new TAP values are learned.
Reset the TAP values. Refer to Transmission Adaptive Functions.
