Lucerne V6-3.8L VIN 2 (2006)
8. Important: Do not reuse retainer (2), it must be replaced.
Insert the manual valve link (3) into the inside detent lever (1).Clip the manual valve link retainer (2) onto the manual valve link (3).
9. Connect the wire harness extension to the wire harness assembly.
10. Install the bottom pan and seal, the scavenger screens, and the lip seals.
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
11. Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to relearn TAP
values. Transmission performance may be affected as new TAP values are learned. Reset the TAP values. Refer to Transmission Adaptive
Functions.
