Lucerne V6-3.8L VIN 2 (2006)
Window Seal: All Technical Service Bulletins
Body - Door Glass Won't Open in Extreme Cold
Bulletin No.: 06-08-64-023
Date: June 21, 2006
TECHNICAL
Subject:
Door Glass Will Not Open In Cold Ambient Temperatures (Modify Sealing Strip and Install Glass Stabilizer)
Models:
2006 Buick Lucerne
Built Prior to VIN Breakpoint 6U206580
Condition
Some customers may comment that the door glass will not open in cold ambient temperatures.
Cause
The door glass may be frozen to the outer belt sealing strip.
Correction
1.
Remove the outer belt sealing strip following the procedures in SI.
2.
Using a razor blade, carefully remove the whole lower sealing strip from the molding.
3.
Before the sealing strip is reinstalled, clean the glass and apply a coating of *Aquapel(R) Glass Treatment to the door glass following the
manufacturer's recommendations.
4.
Reinstall the outer belt sealing strip following the procedures in SI.
5.
Remove the inner belt sealing strip following the procedures in SI.
6.
Install a glass stabilizer to the inner belt sealing flange.
7.
Install the inner belt sealing strip following the procedures in SI.
*We believe this source and their products to be reliable. There may be additional manufacturers of such products. General Motors does not
endorse, indicate any preference for or assume any responsibility for the products from this firm or for any such items which may be available
from other sources.
