Lucerne V6-3.9L (2009)
6. Clean all gasket surfaces with degreaser.
Installation Procedure
1. Coat the valve lifters using prelube. Refer to Adhesives, Fluids, Lubricants, and Sealers (See: Specifications/Adhesives, Fluids, Lubricants, and
Sealers).
2. Install the valve lifters to the cylinder bores.
3. Apply threadlock to the valve lifter guide bolt threads. Refer to Adhesives, Fluids, Lubricants, and Sealers (See: Specifications/Adhesives,
Fluids, Lubricants, and Sealers).
4. Install the valve lifter guides.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Tighten the valve lifter guide bolts.
Tighten the bolts to 10 Nm (89 lb in).
6. Install the valve rocker arms and pushrods. Refer to Valve Rocker Arm and Push Rod Replacement (See: Rocker Arm Assembly/Service and
Repair).
7. Install the lower intake manifold. Refer to Lower Intake Manifold Replacement (See: Intake Manifold/Service and Repair).
