Lucerne V6-3.9L (2009)
Specifications/Adhesives, Fluids, Lubricants, and Sealers).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the upper intake manifold bolts and stud and tighten the bolts to 25 Nm (18 lb ft).
4. Install the intake manifold cover ball stud nut to the intake manifold stud and tighten the nut to 5 Nm (44 lb in).
5. Install the ignition coil bracket to intake manifold bolts and tighten the bolts to 25 Nm (18 lb ft).
6. Install the MAP sensor and bracket.
7. Install the MAP sensor bracket/upper intake manifold bolts and tighten to 25 Nm (18 lb ft).
8. Install the EVAP canister purge solenoid valve.
9. Install the EVAP canister purge solenoid valve bolt and tighten to 16 Nm (12 lb ft).
