buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Hydraulic Brake System Bleeding|Manual|Page 1277 > < Hydraulic Brake System Bleeding|Manual|Page 1275
Page 1
background image

Brake Bleeding: Service and Repair
Hydraulic Brake System Flushing

Hydraulic Brake System Flushing
Warning:
  Refer to Brake Fluid Irritant Warning   (See: Brakes and Traction Control/Service Precautions/Technician Safety Information/Brake
Fluid Irritant Warning).

Caution:  Refer to Brake Fluid Effects on Paint and Electrical Components Caution   (See: Brakes and Traction Control/Service Precautions/Vehicle
Damage Warnings).

1. Inspect the brake fluid for the following conditions, indicating brake fluid contamination:

*

Fluid separation, indicating two types of fluid are present; a substance other than the recommended brake fluid has been introduced into the
brake hydraulic system

-

Swirled appearance-Oil-based substance

-

Layered appearance-Silicone-based substance

*

Fluid discoloration, indicating the presence of moisture or particles that have been introduced into the brake hydraulic system

-

Cloudy appearance-Moisture

-

Dark appearance/suspended particles in fluid-Dirt, rust, corrosion, brake dust

2. Inspect the master cylinder reservoir cap diaphragm and the reservoir-to-master cylinder grommets for swelling, indicating brake fluid

contamination.

3. If the brake fluid WAS contaminated with an oil-based or a silicone-based substance, indicated by fluid separation and/or a swollen master

cylinder reservoir cap diaphragm and/or swollen reservoir-to-master cylinder grommets, perform the following:

1. Remove ALL of the following components listed from the vehicle. Each component contains internal rubber seals/linings which have been

contaminated by the contaminated brake fluid in the brake hydraulic system.
Refer to the procedures indicated:

*

Master Cylinder Replacement   (See: Brakes and Traction Control/Hydraulic System/Brake Master Cylinder/Service and Repair/Removal
and Replacement/Master Cylinder Replacement)

*

Front Brake Hose Replacement   (See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and Repair/Front Brake
Hose Replacement)

*

Rear Brake Hose Replacement   (See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and Repair/Rear Brake
Hose Replacement)

*

Front Brake Caliper Replacement   (See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Removal and
Replacement/Front Brake Caliper Replacement)

*

Rear Brake Caliper Replacement   (See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Removal and
Replacement/Rear Brake Caliper Replacement)

*

Brake Pressure Modulator Valve Replacement   (See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Hydraulic
Control Assembly - Antilock Brakes/Service and Repair/Brake Pressure Modulator Valve Replacement)

2. Clean out all the hydraulic brake pipes using denatured alcohol, or equivalent.
3. Dry the brake pipes using non-lubricated, filtered air.
4. Repair or replace ALL of the following components listed and install them to the vehicle. Each component contains internal rubber

seals/linings which have been contaminated by the contaminated brake fluid in the brake hydraulic system.
Refer to the procedures indicated:

*

Master Cylinder Replacement   (See: Brakes and Traction Control/Hydraulic System/Brake Master Cylinder/Service and Repair/Removal
and Replacement/Master Cylinder Replacement) ; also perform the following: 
Clean the brake master cylinder reservoir using denatured alcohol, or equivalent, then dry the reservoir using non-lubricated, filtered air.
Inspect the reservoir for cracks and/or damage and replace if necessary. Refer to Master Cylinder Reservoir Replacement   (See: Brakes
and Traction Control/Hydraulic System/Brake Master Cylinder/Service and Repair/Removal and Replacement/Master Cylinder Reservoir
Replacement).
Replace the brake master cylinder reservoir cap diaphragm.

*

Front Brake Hose Replacement   (See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and Repair/Front Brake
Hose Replacement)

*

Rear Brake Hose Replacement   (See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and Repair/Rear Brake
Hose Replacement)

*

Front Brake Caliper Overhaul   (See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Overhaul/Front
Brake Caliper Overhaul) or Front Brake Caliper Replacement   (See: Brakes and Traction Control/Disc Brake System/Brake
Caliper/Service and Repair/Removal and Replacement/Front Brake Caliper Replacement)

Hydraulic Brake System Bleeding|Manual|Page 1277 > < Hydraulic Brake System Bleeding|Manual|Page 1275