Lucerne V6-3.9L (2009)
7. Connect the ABS front wheel speed sensor connector. Clip the connector to the dust shield.
8. Install the brake rotor. Refer to Front Brake Rotor Replacement (See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service
and Repair/Removal and Replacement/Front Brake Rotor Replacement).
9. Insert a drift punch or a screwdriver into the caliper and rotor in order to prevent the rotor from turning.
Tighten the drive axle nut to 160 Nm (118 lb ft).
10. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Service and Repair).
11. Lower the vehicle.
