Lucerne V6-3.9L (2009)
Accelerator Pedal Position Sensor: Service and Repair
Accelerator Pedal Position Sensor Replacement
Removal Procedure
1. Remove the left instrument panel (I/P) sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side (See: Body and
Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair).
2. Disconnect the body harness electrical connector (1) from the accelerator pedal position (APP) sensor.
3. Remove the accelerated pedal nuts.
4. Remove the accelerator pedal.
Installation Procedure
