Lucerne V6-3.9L (2009)
5. Loosen the sensor mounting nut.
6. Disengage the anti-rotation tab and slide the sensor downward.
7. Remove the sensor from the vehicle.
Installation Procedure
1. Insert head of the sensor mounting stud into the key hole.
2. Slide the sensor upward until the anti-rotation tab engages in the lower hole.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Tighten the sensor mounting nut.
Tighten the nut to 9 Nm (80 lb in).
