Lucerne V6-3.9L (2009)
15. Position the brake pressure modulator valve into the bracket and install the mounting bolt (2) and tighten the bolt to 10 Nm (89 lb in).
16. Install the brake line retainers (1) onto the frame.
17. Install the power steering gear mounting bolts and tighten to 70 Nm (95 lb ft).
18. Install the power steering line retainers onto the frame.
19. Install the ball joint into the steering knuckle. Refer to Lower Control Arm Replacement (See: Steering and Suspension/Suspension/Control
Arm/Service and Repair/Front Suspension).
20. Install the stabilizer bar links. Refer to Stabilizer Shaft Link Replacement (See: Steering and Suspension/Suspension/Stabilizer Bar/Stabilizer
Link/Service and Repair/Front Suspension).
21. Install the front air deflector. Refer to Front Air Deflector Replacement (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air Dam/Service
and Repair/Front Air Deflector Replacement).
