Lucerne V6-3.9L (2009)
12. With the aid of an assistant (2), remove the windshield (1) from the vehicle.
Installation Procedure
1. Install the windshield into the opening. Refer to Adhesive Installation of Stationary Windows (See: Windows/Service and Repair/Adhesive
Installation of Stationary Windows).
2. Install the windshield moisture rain sensor. Refer to Windshield Outside Moisture Sensor Replacement (See: Sensors and Switches/Sensors and
Switches - Wiper and Washer Systems/Rain Sensor/Service and Repair).
3. Install the vehicle direction alert alarm warning (VDAAW ) module, if equipped. Refer to Vehicle Direction Alert Alarm Warning Module
Calibration (See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Collision Avoidance Module/Service
and Repair/Procedures).
4. Install the rearview mirror. Refer to Inside Rearview Mirror Replacement (See: Body and Frame/Mirrors/Service and Repair/Inside Rearview
Mirror Replacement).
5. Install the interior windshield pillar garnish moldings. Refer to Windshield Pillar Garnish Molding Replacement (See: Body and Frame/Interior
Moulding / Trim/Trim Panel/Service and Repair).
6. Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement (See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair).
7. Install the windshield wipers arms and blades. Refer to Windshield Wiper Arm Replacement (See: Wiper and Washer Systems/Wiper
Arm/Service and Repair).
8. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
9. Close the hood.
