Lucerne V8-4.6L (2008)
Body / Frame Mount Bushing: Service and Repair
Rear Body Mount Replacement
Rear Body Mount Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair) .
3. Support the exhaust and the rear of the support assembly. Use a block of wood at least 7 inches long.
4. Remove the exhaust hangers.
5. Remove the rear support assembly mounting bolts and lower the rear support assembly and exhaust together.
6. Remove the rear body mount mounting bolts.
7. Remove the rear body mount.
Installation Procedure
1. Install the rear body mount and the two bolts ensuring that OUT is toward the outboard of the vehicle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the rear body mount mounting bolts.
Tighten the rear body mount mounting bolts to 77 N.m (57 lb ft).
3. Raise and support the exhaust system and rear support assembly.
4. Install the rear support assembly mounting bolts.
Tighten the rear support assembly mounting bolt to 181 N.m (133 lb ft).
5. Install the exhaust hangers
6. Install the tire and the wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair) .
7. Lower the vehicle.
