Lucerne V8-4.6L (2008)
3. Using dowel pins in the alignment holes (1), align the engine frame (2) with the vehicle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Install the engine frame insulator retainer bolts in order to retain the engine frame to the vehicle.
Tighten the retainers to 181 N.m (133 lb ft).
5. Check the front wheel alignment. Refer to Wheel Alignment Specifications (See: Maintenance/Alignment/Specifications) .
6. Raise the vehicle away from the jack stands supporting the engine frame.
7. Install the fasteners in order to retain the rear transaxle mount (1) to the bracket.
Tighten the retainers to 50 N.m (37 lb ft).
8. Install the fastener in order to retain the front engine mount to the engine frame.
Tighten the fastener to 70 N.m (52 lb ft).
9. Install the fasteners in order to retain the steering gear to the engine frame.
Tighten the fastener to 95 N.m (70 lb ft).
