Lucerne V8-4.6L (2008)
10. Remove the 6 suspension support reinforcement brace bolts (3).
11. Remove the 4 suspension support assembly bolts (2).
12. Remove the 2 suspension support reinforcement braces (4).
13. Lower the transmission jack and remove the suspension support assembly (5).
14. Transfer all necessary parts from the old support to the new support.
Installation Procedure
1. Raise the suspension support assembly (5) into position with the transmission jack.
2. Install the 2 suspension support reinforcement braces (4).
3. loosely install the 6 suspension support reinforcement brace bolts (3).
4. Align the suspension support assembly utilizing the alignment gage holes (1).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
5. Install the 4 suspension support assembly bolts (2).