Lucerne V8-4.6L (2008)
Carpet: Service and Repair
Front Floor Panel Carpet Replacement
Front Floor Panel Carpet Replacement
Removal Procedure
Caution: Refer to SIR Caution (See: Restraint Systems/Service Precautions/Technician Safety Information/SIR Caution) .
1. Disable the SIR system. Refer to SIR Disabling and Enabling (See: Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and
Repair) .
2. Remove the front seats. Refer to Driver or Passenger Seat Replacement (See: Seats/Service and Repair/Driver or Passenger Seat Replacement) .
3. Remove the front floor console. Refer to Console Replacement (See: Console/Service and Repair) .
4. Remove the carpet retainers. Refer to Front Carpet Retainer Replacement (See: ) .
5. Remove the front carpet (1).
Installation Procedure
Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as
the original installation. Always return the carpet to the original location.
1. Lay the front carpet (1) into the vehicle.
2. Work the front edges of the carpet into place under the instrument panel.
3. Install the floor vent into the floor ducts, if equipped.
4. Install the center console. Refer to Console Replacement (See: Console/Service and Repair) .
5. Install the carpet retainer. Refer to Front Carpet Retainer Replacement (See: ) .
6. Install the front seats. Refer to Driver or Passenger Seat Replacement (See: Seats/Service and Repair/Driver or Passenger Seat Replacement) .
7. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and
Repair) .
