Lucerne V8-4.6L (2008)
3. Hook the outer end of the spring (1) around the standing rib (2), then allow the spring to flex and seat into position.
Important
Ensure the ashtray door is in the open position when installing the retainer assembly.
8. Position the retainer assembly to the opening in the ashtray housing and hook the outer spring end (1) over the standing rib (2) on the housing.
9. Use your thumb to hold the components in place until the clamp can be positioned.
Tip
You will here an audible click when the retainer assembly fully engages and snaps into the housing.
10. As shown above, use a clamp to fully seat the retainer assembly into the ashtray housing.
11. Ensure that the ashtray door is properly opening/closing and that the mechanism is traveling freely.
12. Install the front floor console front ashtray. Refer to Front Floor Console Front Ashtray Replacement in SI.
Parts Information
