Lucerne V8-4.6L (2008)
Installation Procedure
1. Connect the park brake warning lamp switch electrical connector.
2. Install the park brake pedal assembly to the vehicle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
3. Install the park brake pedal assembly mounting nuts (1, 2) to the vehicle.
Tighten the park brake pedal assembly mounting nuts to 24 N.m (18 lb ft).
4. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
5. Install the front park brake cable (3) to the cable connector (1).
6. Lower the vehicle.
