Lucerne V8-4.6L (2008)
Important: Care should be taken when installing the cooling fan assembly not to damage the lower attachment points of both the cooling
fan assembly and radiator.
1. Install the fan shroud assembly to the vehicle in the following order:
1. Position the fan shroud assembly behind the radiator.
2. Position the fan shroud assembly towards the right side of the vehicle.
3. Push downward on the right side of the fan shroud assembly.
4. Move the fan shroud assembly into position, aligning the lower feet of the fan shroud to the mounting tabs on the radiator.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
Important: The bolts retaining the cooling fan to the radiator end tanks are a special length and should be the ONLY bolts used upon
reinstallation. The use of longer bolts will damage the radiator end tanks.
2. Install the fan shroud mounting bolts.
