Lucerne V8-4.6L (2008)
Tighten the bolts to 6 N.m (53 lb in).
3. Connect the wiring harness electrical connectors (1) to the cooling fan motors.
4. Attach the wiring harness retaining clips (2) to the fan shroud.
5. Push the upper transaxle oil cooler pipe into the radiator quick connect fitting, until a "click" is heard.
6. Tug gently on the cooler pipe to ensure proper retention.
7. Slide the plastic cap (1) over the quick connect joint.
8. Install the transmission oil cooler pipe retaining bolts to the fan shroud.
Tighten the bolts to 6 N.m (53 lb in).
