Lucerne V8-4.6L (2008)
Notice: Refer to Torque Reaction Against Timing Drive Chain Notice (See: Service Precautions).
8. Use an open end wrench on the hex cast into the camshaft in order to prevent the camshaft from rotating when removing the camshaft sprocket
bolt.
9. Remove the right exhaust camshaft sprocket bolt.
10. Slide the right exhaust camshaft sprocket off of the camshaft and remove the right secondary camshaft drive chain from the camshaft sprocket
teeth.
11. Lift the right secondary camshaft drive chain from the camshaft intermediate drive shaft sprocket teeth.
12. Remove the right secondary camshaft drive chain from the engine.
13. Clean and inspect the camshaft timing drive components. Refer to Camshaft Timing Drive Components Cleaning and Inspection ().
Installation Procedure