Lucerne V8-4.6L (2008)
Notice: Refer to Fastener Notice.
2. Install the left secondary camshaft drive chain shoe bolt.
Tighten the secondary camshaft drive chain shoe bolt to 25 N.m (18 lb ft).
3. Install the left secondary camshaft drive chain shoe access plug (3) located in the cylinder head. Ensure the O-ring seal is attached to the access
plug.
Tighten the secondary camshaft drive chain shoe access plug to 4.5 N.m (40 lb in).
4. Install the left intake camshaft sprocket into the left secondary camshaft drive chain.
5. Install the left intake camshaft sprocket onto the camshaft. The camshaft sprocket notch marked LI (left intake) engages the intake camshaft pin.