Lucerne V8-4.6L (2008)
1. Install the front exhaust manifold pipe flange and a NEW seal onto the exhaust manifold.
2. Insert the upper right exhaust manifold bolt to the manifold in this location (2).
3. Place the NEW exhaust manifold gasket over the bolt and against the manifold.
4. Insert the exhaust manifold into the front exhaust manifold pipe and against the cylinder head.
5. Finger start the exhaust manifold bolt.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
6. Install the remaining exhaust manifold bolts and tighten all exhaust manifold bolts starting from right to left beginning with the bolt in this location
(2).
Tighten the bolts to 25 N.m (18 lb ft).
7. Install the exhaust manifold front pipe bolts (2).
