Lucerne V8-4.6L (2008)
replaced if disconnected from the water pump housing.
4. Disconnect the EGR inlet pipe nut from the front exhaust manifold pipe.
5. Remove the front exhaust manifold pipe to lower crankcase bolt.
6. Remove the front exhaust manifold pipe to cylinder head stud.
7. Remove the front exhaust manifold pipe.
8. Remove the front exhaust manifold pipe seal from the left exhaust manifold and discard the seal.
9. Remove the exhaust manifold flange retainer.
Installation Procedure
1. Place the retainer and a NEW front exhaust manifold pipe seal over the left exhaust manifold.
2. Insert the front exhaust manifold pipe over the left exhaust manifold.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).