Lucerne V8-4.6L (2008)
28. Disconnect the EGR inlet pipe nut from the exhaust manifold front pipe.
Important: The EGR valve inlet pipe incorporates a crush seal connection at the water pump housing. The EGR valve inlet pipe must be
replaced if disconnected from the water pump housing.
29. Remove the EGR inlet pipe bolt from the water pump housing.
30. Remove and discard the EGR inlet pipe.
31. Remove the evaporative emission (EVAP) canister purge solenoid valve bolt.
32. Remove the EVAP canister purge solenoid valve.
