Lucerne V8-4.6L (2008)
44. Position the oil level indicator tube.
45. Install the oil level indicator tube nut.
Tighten the nut to 10 N.m (89 lb in).
46. Install the brake booster vacuum hose to the water pump housing.
47. Position the brake booster vacuum hose clamp at the water pump housing.
48. Install the water pump drive belt. Refer to Water Pump Belt Replacement (LD8) (See: Drive Belt/Service and Repair/Water Pump Belt
Replacement (LD8)).
49. Install the air cleaner. Refer to Air Cleaner Assembly Replacement (See: Filters/Air Cleaner Housing/Service and Repair).
50. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service and
Repair)Cooling System Draining and Filling (Vac-N-Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service and Repair).
51. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Injector/Service and Repair/Fuel Injector Sight Shield Replacement).