Lucerne V8-4.6L (2008)
1. Lubricate the crankshaft sensor O-ring seal with clean engine oil.
2. Install the CKP sensor.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
3. Install the CKP sensor bolt.
Tighten the bolt to 10 N.m (89 lb in).
4. Connect the CKP sensor wiring harness electrical connector (1) to the CKP sensor.
5. Install the intake manifold. Refer to Intake Manifold Replacement (See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
).
6. Perform the CKP system variation learn procedure. Refer to Crankshaft Position System Variation Learn (See: Testing and
Inspection/Programming and Relearning).
