Lucerne V8-4.6L (2008)
4. Connect the CKP sensor wiring harness electrical connector (3) to the right knock sensor.
5. Connect the harness clip (3) to the engine harness ground bracket.
6. Connect the CKP sensor wiring harness electrical connector (2) to the left knock sensor.
7. Connect the CKP sensor wiring harness electrical connector (1) to the CKP sensor.
8. Install the intake manifold. Refer to Intake Manifold Replacement (See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
).
9. Connect the engine harness electrical connector (1) to the CKP sensor wiring harness electrical connector.