Lucerne V8-4.6L (2008)
9. Pinch the constant tension clamp and remove the AIR pipe from the check valve.
10. Remove the AIR pipe nuts (2, 3).
11. Remove the AIR pipe.
Installation Procedure
1. Install the AIR pipe.
2. Connect the AIR pipe to the check valve.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
3. Install the AIR pipe nuts (2, 3).
Tighten the nuts to 9 N.m (80 lb in).