Lucerne V8-4.6L (2008)
4. Remove the EVAP canister purge solenoid valve bolt.
5. Remove the EVAP canister purge solenoid valve.
Installation Procedure
Important: Be sure to install a NEW O-ring on the EVAP purge solenoid valve.
1. Install the EVAP canister purge solenoid valve.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the EVAP canister purge solenoid valve bolt.
Tighten the bolt to 10 N.m (89 lb ft).