Lucerne V8-4.6L (2008)
3. Install the PCV foul air tube to the retaining features on the intake manifold.
4. Install the power steering pump into position.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
5. Install the power steering pump bolt.
Tighten the bolt to 50 N.m (37 lb ft).
6. Install the drive belt. Refer to Drive Belt Replacement (See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and
Accessories/Drive Belt/Service and Repair/Drive Belt Replacement).
7. If servicing the PCV fresh air tube, perform the following steps, route the PCV fresh air tube under the brake booster vacuum hose and EVAP
purge solenoid.
8. Connect the PCV fresh air tube quick connect fitting at the air cleaner outlet duct. Refer to Plastic Collar Quick Connect Fitting Service (See: Fuel
Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).