Lucerne V8-4.6L (2008)
Fuel Tank Unit: Service and Repair
Fuel Sender Assembly Replacement
Special Tools
J 45722 Fuel Sender Lock Ring Wrench
Removal Procedure
Caution: Refer to Gasoline/Gasoline Vapors Caution (See: Fuel/Service Precautions).
Caution: In order to reduce the risk of fire and personal injury that may result from a fuel leak, always replace the fuel sender gasket when reinstalling
the fuel sender assembly.
1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief (With CH 48027) (See: Fuel Filter/Fuel Pressure Release/Service and Repair/Fuel
Pressure Relief (With CH 48027))Fuel Pressure Relief (Without CH 48027) (See: Fuel Filter/Fuel Pressure Release/Service and Repair/Fuel
Pressure Relief (Without CH 48027)).
2. Remove the rear compartment liner. Refer to Rear Compartment Trim Panel Replacement (See: Body and Frame/Interior Moulding / Trim/Trim
Panel/Service and Repair).
3. Remove the fuel sender access hole cover bolts.
4. Remove the fuel sender access hole cover.
