Lucerne V8-4.6L (2008)
1. Install the accelerator pedal.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the accelerated pedal nuts.
Tighten the nuts to 10 N.m (89 lb in).
3. Connect the body harness electrical connector (1) to the APP sensor.
4. Install the left I/P sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair).
