Lucerne V8-4.6L (2008)
1. If servicing the ignition coil assembly, perform the following steps, if servicing an individual ignition coil proceed to step 6.
2. Install the ignition coil assembly.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
3. Install the ignition coil assembly bolts.
Tighten the bolts to 10 N.m (89 lb in).
4. Install the fuel injector sight shield studs.
Tighten the studs to 10 N.m (89 lb in).
