Lucerne V8-4.6L (2008)
6. Disconnect the individual ignition coil electrical connector (3), as required.
7. Remove the individual ignition coil bolt (1), as required.
8. Remove the ignition coil (2), as required.
Installation Procedure
1. If servicing the ignition coil assembly, perform the following steps, if servicing an individual ignition coil proceed to step 5.
2. Install the ignition coil assembly.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
3. Install the ignition coil assembly bolts.
Tighten the bolts to 10 N.m (89 lb in).
