Lucerne V8-4.6L (2008)
4. Connect the engine harness electrical connector (3) to the ignition coil assembly.
5. Install the ignition coil (2), as required.
6. Install the individual ignition coil bolt (1), as required.
Tighten the bolt to 10 N.m (89 lb in).
7. Connect the individual ignition coil electrical connector (3), as required.
8. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (See: Fuel Delivery and Air Induction/Fuel Injector/Service
and Repair/Fuel Injector Sight Shield Replacement).