Lucerne V8-4.6L (2008)
Fuel Tank Pressure Sensor: Service and Repair
Fuel Tank Pressure Sensor Replacement
Removal Procedure
1. Remove the rear compartment liner. Refer to Rear Compartment Trim Panel Replacement (See: Body and Frame/Interior Moulding / Trim/Trim
Panel/Service and Repair).
2. Remove the fuel sender access hole cover bolts.
3. Remove the fuel sender access hole cover.
4. Disconnect the fuel level sensor wiring harness electrical connector (1) fuel tank pressure sensor.
5. Remove the fuel tank pressure sensor.
Installation Procedure