buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Engine Controls - Aftermarket Accessory Usage|Page 508 > < Engine Controls - Aftermarket Accessory Usage|Page 506
Page 5
background image

4. Install the air cleaner upper housing.
5. Engage the upper housing front tabs to the lower housing.
6. Engage the lower housing clips (1).

Important:  Properly install the air cleaner outlet duct to the throttle body. An improperly installed, distorted, or damaged air duct may
cause a DTC to set.

7. Install the air cleaner outlet duct to the throttle body.

Notice:  Refer to Fastener Notice  (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).

8. Tighten the air cleaner outlet duct clamp at the throttle body.

Tighten the clamp to 3 N.m (27 lb in).

Engine Controls - Aftermarket Accessory Usage|Page 508 > < Engine Controls - Aftermarket Accessory Usage|Page 506