Lucerne V8-4.6L (2008)
3. Remove the rear generator bolt.
4. Remove the engine ground cable.
Installation Procedure
1. Position the engine ground cable to the generator.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the rear generator bolt.
Tighten the bolt to 50 N.m (37 lb ft).
3. Install the bolt (1) securing the engine ground cable (2) to the right side body frame rail.
Tighten the bolt to 25 N.m (18 lb ft).
