Lucerne V8-4.6L (2008)
Starter Motor: Service and Repair
Starter Motor Replacement (RPO LD8)
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Battery/Battery Cable/Service and
Repair).
2. Remove the intake manifold. Refer to Intake Manifold Replacement (See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and
Repair).
3. Remove the "BAT" terminal nut (1) from the starter.
4. Remove the "S" terminal nut (2) from the starter.
5. Remove the starter solenoid cable from the starter.
6. Remove the starter motor bolts.
7. Remove the starter motor.