Lucerne V8-4.6L (2008)
Stabilizer Bushing: Service and Repair
Front Suspension
Stabilizer Shaft Insulator Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Wheels and Tires/Vehicle Lifting/Service and Repair).
2. Remove the stabilizer shaft bracket bolts.
3. Remove the stabilizer shaft bracket.
4. Using a pry bar, lift upwards on the stabilizer shaft and remove the stabilizer shaft insulator.
Installation Procedure
1. Using a pry bar, lift up on the stabilizer shaft and install the stabilizer shaft insulator.
2. Install the stabilizer shaft bracket.
Notice: Refer to Fastener Notice.
3. Install the stabilizer shaft bracket bolts.
Tighten the stabilizer shaft bracket bolts to 47 N.m (35 lb ft).
4. Lower the vehicle.
